ITI Refrigeration and AC Mechanic Resume Format — With a Full Sample
RAC hiring splits sharply between installation and service. Installation teams want brazing, vacuum and commissioning; service teams want fault diagnosis, gas charging and electrical troubleshooting. Most candidates write "AC technician" and let the employer guess. This format forces the page to say which work you do and on which equipment.
Get your current resume scored out of 100 free, then rebuild it in this format in about a minute.
Check my resume freeThe line most ITI Refrigeration and AC Mechanic resumes get wrong
Write NCVT or SCVT next to the trade. Then name the equipment classes you have worked - window, split, cassette, ducted, VRF, or commercial refrigeration - because these are hired by different teams, and the refrigerants and controls differ enough that the distinction is not a formality.
Sample ITI Refrigeration and AC Mechanic resume
Everything below is plain, selectable text — the way a recruitment system needs to read it. Swap in your own details and the structure keeps working. Trade: Mechanic Refrigeration and Air Conditioning (2-year ITI trade, NCVT/SCVT).
Your Name
ITI Refrigeration and Air Conditioning Mechanic (NCVT) with one year in AC service and installation. Installs and commissions split and window units - bracket and drain fall, interconnecting pipe brazing, evacuation and charging to the stated weight - and diagnoses cooling complaints across the refrigeration circuit and the electrical control side before replacing any part.
Split and Window AC · Cassette and Ducted Units · VRF Systems (basic) · Commercial Refrigeration · Compressors · Condenser and Evaporator Coils · Refrigerants R22 / R32 / R410A · Gas Charging · Brazing · Vacuum Pump and Evacuation · Leak Testing · Electrical Controls and Thermostats · Capacitor and Relay Testing · Preventive Maintenance
- Installed and commissioned split air conditioners including pipe brazing, nitrogen leak check, vacuum evacuation and charging to the rated gas weight
- Diagnosed low-cooling complaints by separating refrigeration-side faults from electrical control faults, using pressure readings and capacitor and relay testing
- Carried out preventive servicing on a maintained portfolio of units - coil and filter cleaning, drain clearing and electrical terminal checks
- Traced a repeat gas-loss complaint to a flare joint rather than topping up the charge again, ending a cycle of recharge visits for that customer
Want this exact layout with your own details in it?
Use this format freeCareer objective examples for ITI Refrigeration and AC Mechanic
Pick the one that matches where you actually are and rewrite it in your own words. A career objective copied unchanged from any website — including this one — reads exactly like what it is, so change the specifics to yours.
ITI Refrigeration and Air Conditioning Mechanic (NCVT, 2026) trained in split and window AC installation, brazing, evacuation and gas charging, with practice in electrical control testing. Seeking a trainee AC technician role with a service or installation company.
ITI RAC Mechanic with one year in AC service, handling split and window unit installation, preventive servicing, gas charging and electrical fault finding. Looking for a technician position covering cassette and ducted systems as well.
RAC Technician with 4 years across residential and commercial air conditioning, handling installation, commissioning, leak diagnosis and gas charging on split, cassette and ducted systems. Seeking a senior technician role with commissioning responsibility.
Resume headline examples for ITI Refrigeration and AC Mechanic
Job portals such as Naukri, Apna and WorkIndia show this one line to recruiters before they open anything else, and recruiters search it as text. Keep it between eight and fifteen words, and put the words a hiring supervisor would actually type into it.
- ITI RAC Mechanic (NCVT) | Split & Window AC | Brazing, Evacuation, Gas Charging
- AC Technician | 4 Yrs Residential & Commercial | Installation, Commissioning, Leak Diagnosis | Immediate Joiner
- ITI Refrigeration & AC Fresher 2026 | Installation & Service Training | Ready for Field Work
Skills and equipment to list on ITI Refrigeration and AC Mechanic resumes
Use the ones that are genuinely true of you, written into your own bullet points rather than dumped in a block. A trade test or a first week on the job settles any claim here, so an honest shorter list beats a long one.
What employers look for on ITI Refrigeration and AC Mechanic resumes
- Say whether you do installation, service, or both. They are separate teams with separate skills, and a resume that does not say gets sorted into whichever has vacancies.
- Name the equipment classes - window, split, cassette, ducted, VRF, commercial refrigeration. VRF and commercial work are the harder hires and belong near the top if you have them.
- List the refrigerants you have handled. R22, R32 and R410A carry different pressures and handling practice, and naming them shows real field exposure.
- Write diagnosis as method. "Separated refrigeration-side from electrical-side faults using pressure readings and capacitor testing" is credible; "AC repairing expert" is not.
- Mention evacuation explicitly. Charging without proper vacuum is the most common bad practice in the trade, so a technician who states the step is signalling quality.
- Keep it one page and plain, and carry a printed copy - field service hiring is often decided in a same-day interview at the branch office.
Common questions
Do I need experience on VRF systems to get a good AC technician job?
No, but it changes which employers can use you. Residential split and window work is the largest part of the market and is hired continuously. VRF, cassette and ducted work sits with commercial service teams and typically pays better, so state any exposure you have honestly - even assisting on commissioning is worth naming.
Should I list refrigerants on my resume?
Yes. R22, R32 and R410A behave differently, and a technician who names them is clearly describing real work rather than a course. It also tells a service manager which equipment generation you have been on, which they cannot infer from the trade certificate.
Is installation or service experience more valuable?
Neither outranks the other in general - they are different hires. Installation is project-driven and seasonal; service is year-round and diagnosis-heavy. Write whichever matches the advertisement first, and keep the other visible so you remain eligible for both.
How do I write field experience if I worked informally with a technician?
Describe it precisely: the units you worked on, the installation steps you performed yourself, the faults you were shown how to trace, and roughly how many jobs a week. Informal field experience is genuinely useful, and specific description is what makes an employer treat it seriously.
CVCrisp scores your resume out of 100, tells you exactly what is costing you points, and rebuilds it across 15 recruiter-tested templates. Free to use — you only pay when you download.
Score my resume free